attohenry to femtohenry
Convert attohenry (aH) to femtohenry (fH). Use an editable inductance converter, conversion formula, and reference table.
1 aH = 0.001 fH
Conversion formula
One attohenry equals 0.001 femtohenry. Multiply your value in attohenry by this factor to get femtohenry. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 attohenry:5 × 0.001 = 0.005 fH
Conversion table
| attohenry (aH) | femtohenry (fH) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Inductance describes the relationship between changing current and induced voltage.
The base reference used here is the henry. One attohenry is 1e-18 base units; one femtohenry is 1e-15 base units.
Important distinctions
A prefix changes only the scale of the inductance unit.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert aH to fH?
Multiply the quantity in aH by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the femtohenry to attohenry converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
