dyne second to newton second
Convert dyne second (dyn·s) to newton second (N·s). Use an editable impulse converter, conversion formula, and reference table.
1 dyn·s = 0.00001 N·s
Conversion formula
One dyne second equals 0.00001 newton second. Multiply your value in dyne second by this factor to get newton second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 dyne second:5 × 0.00001 = 0.00005 N·s
Conversion table
| dyne second (dyn·s) | newton second (N·s) |
|---|---|
| 0.01 | 1e-7 |
| 0.1 | 0.000001 |
| 1 | 0.00001 |
| 2 | 0.00002 |
| 5 | 0.00005 |
| 10 | 0.0001 |
| 25 | 0.00025 |
| 50 | 0.0005 |
| 100 | 0.001 |
| 1000 | 0.01 |
About these measurements
Impulse is force integrated over time.
The base reference used here is the newton second. One dyne second is 0.00001 base units; one newton second is 1 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dyn·s to N·s?
Multiply the quantity in dyn·s by 0.00001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the newton second to dyne second converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
