decinewton to millinewton
Convert decinewton (dN) to millinewton (mN). Use an editable force converter, conversion formula, and reference table.
1 dN = 100 mN
Conversion formula
One decinewton equals 100 millinewton. Multiply your value in decinewton by this factor to get millinewton. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decinewton:5 × 100 = 500 mN
Conversion table
| decinewton (dN) | millinewton (mN) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Force describes an interaction that can change motion.
The base reference used here is the newton. One decinewton is 0.1 base units; one millinewton is 0.001 base units.
Important distinctions
Gravitational force units use standard gravity, 9.80665 m/s².
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dN to mN?
Multiply the quantity in dN by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the millinewton to decinewton converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
