decanewton to hectonewton
Convert decanewton (daN) to hectonewton (hN). Use an editable force converter, conversion formula, and reference table.
1 daN = 0.1 hN
Conversion formula
One decanewton equals 0.1 hectonewton. Multiply your value in decanewton by this factor to get hectonewton. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decanewton:5 × 0.1 = 0.5 hN
Conversion table
| decanewton (daN) | hectonewton (hN) |
|---|---|
| 0.01 | 0.001 |
| 0.1 | 0.01 |
| 1 | 0.1 |
| 2 | 0.2 |
| 5 | 0.5 |
| 10 | 1 |
| 25 | 2.5 |
| 50 | 5 |
| 100 | 10 |
| 1000 | 100 |
About these measurements
Force describes an interaction that can change motion.
The base reference used here is the newton. One decanewton is 10 base units; one hectonewton is 100 base units.
Important distinctions
Gravitational force units use standard gravity, 9.80665 m/s².
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daN to hN?
Multiply the quantity in daN by 0.1. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the hectonewton to decanewton converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
