microohm meter to milliohm meter
Convert microohm meter (μΩ·m) to milliohm meter (mΩ·m). Use an editable electrical resistivity converter, conversion formula, and reference table.
1 μΩ·m = 0.001 mΩ·m
Conversion formula
One microohm meter equals 0.001 milliohm meter. Multiply your value in microohm meter by this factor to get milliohm meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 microohm meter:5 × 0.001 = 0.005 mΩ·m
Conversion table
| microohm meter (μΩ·m) | milliohm meter (mΩ·m) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Resistivity describes a material’s resistance independent of shape.
The base reference used here is the ohm meter. One microohm meter is 0.000001 base units; one milliohm meter is 0.001 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μΩ·m to mΩ·m?
Multiply the quantity in μΩ·m by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the milliohm meter to microohm meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
