millivolt per meter to megavolt per meter
Convert millivolt per meter (mV/m) to megavolt per meter (MV/m). Use an editable electric field strength converter, conversion formula, and reference table.
1 mV/m = 1e-9 MV/m
Conversion formula
One millivolt per meter equals 1e-9 megavolt per meter. Multiply your value in millivolt per meter by this factor to get megavolt per meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millivolt per meter:5 × 1e-9 = 5e-9 MV/m
Conversion table
| millivolt per meter (mV/m) | megavolt per meter (MV/m) |
|---|---|
| 0.01 | 1e-11 |
| 0.1 | 1e-10 |
| 1 | 1e-9 |
| 2 | 2e-9 |
| 5 | 5e-9 |
| 10 | 1e-8 |
| 25 | 2.5e-8 |
| 50 | 5e-8 |
| 100 | 1e-7 |
| 1000 | 0.000001 |
About these measurements
Electric field strength is force per unit electric charge.
The base reference used here is the volt per meter. One millivolt per meter is 0.001 base units; one megavolt per meter is 1,000,000 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mV/m to MV/m?
Multiply the quantity in mV/m by 1e-9. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the megavolt per meter to millivolt per meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
