megaampere to picoampere
Convert megaampere (MA) to picoampere (pA). Use an editable electric current converter, conversion formula, and reference table.
1 MA = 1e+18 pA
Conversion formula
One megaampere equals 1e+18 picoampere. Multiply your value in megaampere by this factor to get picoampere. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 megaampere:5 × 1e+18 = 5e+18 pA
Conversion table
| megaampere (MA) | picoampere (pA) |
|---|---|
| 0.01 | 1e+16 |
| 0.1 | 1e+17 |
| 1 | 1e+18 |
| 2 | 2e+18 |
| 5 | 5e+18 |
| 10 | 1e+19 |
| 25 | 2.5e+19 |
| 50 | 5e+19 |
| 100 | 1e+20 |
| 1000 | 1e+21 |
About these measurements
Electric current is the rate of electric charge flow.
The base reference used here is the ampere. One megaampere is 1,000,000 base units; one picoampere is 1e-12 base units.
Important distinctions
Current units describe the same quantity; AC RMS and DC values are not interchangeable measurements.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert MA to pA?
Multiply the quantity in MA by 1e+18. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the picoampere to megaampere converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
