kiloampere to deciampere
Convert kiloampere (kA) to deciampere (dA). Use an editable electric current converter, conversion formula, and reference table.
1 kA = 10,000 dA
Conversion formula
One kiloampere equals 10,000 deciampere. Multiply your value in kiloampere by this factor to get deciampere. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kiloampere:5 × 10,000 = 50,000 dA
Conversion table
| kiloampere (kA) | deciampere (dA) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Electric current is the rate of electric charge flow.
The base reference used here is the ampere. One kiloampere is 1,000 base units; one deciampere is 0.1 base units.
Important distinctions
Current units describe the same quantity; AC RMS and DC values are not interchangeable measurements.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kA to dA?
Multiply the quantity in kA by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the deciampere to kiloampere converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
