femtoampere to decaampere
Convert femtoampere (fA) to decaampere (daA). Use an editable electric current converter, conversion formula, and reference table.
1 fA = 1e-16 daA
Conversion formula
One femtoampere equals 1e-16 decaampere. Multiply your value in femtoampere by this factor to get decaampere. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 femtoampere:5 × 1e-16 = 5e-16 daA
Conversion table
| femtoampere (fA) | decaampere (daA) |
|---|---|
| 0.01 | 1e-18 |
| 0.1 | 1e-17 |
| 1 | 1e-16 |
| 2 | 2e-16 |
| 5 | 5e-16 |
| 10 | 1e-15 |
| 25 | 2.5e-15 |
| 50 | 5e-15 |
| 100 | 1e-14 |
| 1000 | 1e-13 |
About these measurements
Electric current is the rate of electric charge flow.
The base reference used here is the ampere. One femtoampere is 1e-15 base units; one decaampere is 10 base units.
Important distinctions
Current units describe the same quantity; AC RMS and DC values are not interchangeable measurements.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert fA to daA?
Multiply the quantity in fA by 1e-16. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decaampere to femtoampere converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
