siemens per meter to millisiemens per centimeter
Convert siemens per meter (S/m) to millisiemens per centimeter (mS/cm). Use an editable electrical conductivity converter, conversion formula, and reference table.
1 S/m = 10 mS/cm
Conversion formula
One siemens per meter equals 10 millisiemens per centimeter. Multiply your value in siemens per meter by this factor to get millisiemens per centimeter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 siemens per meter:5 × 10 = 50 mS/cm
Conversion table
| siemens per meter (S/m) | millisiemens per centimeter (mS/cm) |
|---|---|
| 0.01 | 0.1 |
| 0.1 | 1 |
| 1 | 10 |
| 2 | 20 |
| 5 | 50 |
| 10 | 100 |
| 25 | 250 |
| 50 | 500 |
| 100 | 1,000 |
| 1000 | 10,000 |
About these measurements
Conductivity describes the material’s ability to conduct current.
The base reference used here is the siemens per meter. One siemens per meter is 1 base units; one millisiemens per centimeter is 0.1 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert S/m to mS/cm?
Multiply the quantity in S/m by 10. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the millisiemens per centimeter to siemens per meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
