millisiemens per centimeter to siemens per centimeter
Convert millisiemens per centimeter (mS/cm) to siemens per centimeter (S/cm). Use an editable electrical conductivity converter, conversion formula, and reference table.
1 mS/cm = 0.001 S/cm
Conversion formula
One millisiemens per centimeter equals 0.001 siemens per centimeter. Multiply your value in millisiemens per centimeter by this factor to get siemens per centimeter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millisiemens per centimeter:5 × 0.001 = 0.005 S/cm
Conversion table
| millisiemens per centimeter (mS/cm) | siemens per centimeter (S/cm) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Conductivity describes the material’s ability to conduct current.
The base reference used here is the siemens per meter. One millisiemens per centimeter is 0.1 base units; one siemens per centimeter is 100 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mS/cm to S/cm?
Multiply the quantity in mS/cm by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the siemens per centimeter to millisiemens per centimeter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
