microsiemens per centimeter to microsiemens per meter
Convert microsiemens per centimeter (μS/cm) to microsiemens per meter (μS/m). Use an editable electrical conductivity converter, conversion formula, and reference table.
1 μS/cm = 100 μS/m
Conversion formula
One microsiemens per centimeter equals 100 microsiemens per meter. Multiply your value in microsiemens per centimeter by this factor to get microsiemens per meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 microsiemens per centimeter:5 × 100 = 500 μS/m
Conversion table
| microsiemens per centimeter (μS/cm) | microsiemens per meter (μS/m) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Conductivity describes the material’s ability to conduct current.
The base reference used here is the siemens per meter. One microsiemens per centimeter is 0.0001 base units; one microsiemens per meter is 0.000001 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μS/cm to μS/m?
Multiply the quantity in μS/cm by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the microsiemens per meter to microsiemens per centimeter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
