pound force second per square foot to centipoise
Convert pound force second per square foot (lbf·s/ft²) to centipoise (cP). Use an editable dynamic viscosity converter, conversion formula, and reference table.
1 lbf·s/ft² = 47,880.25898 cP
Conversion formula
One pound force second per square foot equals 47,880.25898 centipoise. Multiply your value in pound force second per square foot by this factor to get centipoise. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 pound force second per square foot:5 × 47,880.25898 = 239,401.2949 cP
Conversion table
| pound force second per square foot (lbf·s/ft²) | centipoise (cP) |
|---|---|
| 0.01 | 478.8025898 |
| 0.1 | 4,788.025898 |
| 1 | 47,880.25898 |
| 2 | 95,760.51796 |
| 5 | 239,401.2949 |
| 10 | 478,802.5898 |
| 25 | 1,197,006.475 |
| 50 | 2,394,012.949 |
| 100 | 4,788,025.898 |
| 1000 | 47,880,258.98 |
About these measurements
Dynamic viscosity describes resistance to shear flow.
The base reference used here is the pascal second. One pound force second per square foot is 47.88025898 base units; one centipoise is 0.001 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert lbf·s/ft² to cP?
Multiply the quantity in lbf·s/ft² by 47,880.25898. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the centipoise to pound force second per square foot converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
