micropascal second to pascal second
Convert micropascal second (μPa·s) to pascal second (Pa·s). Use an editable dynamic viscosity converter, conversion formula, and reference table.
1 μPa·s = 0.000001 Pa·s
Conversion formula
One micropascal second equals 0.000001 pascal second. Multiply your value in micropascal second by this factor to get pascal second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 micropascal second:5 × 0.000001 = 0.000005 Pa·s
Conversion table
| micropascal second (μPa·s) | pascal second (Pa·s) |
|---|---|
| 0.01 | 1e-8 |
| 0.1 | 1e-7 |
| 1 | 0.000001 |
| 2 | 0.000002 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
| 1000 | 0.001 |
About these measurements
Dynamic viscosity describes resistance to shear flow.
The base reference used here is the pascal second. One micropascal second is 0.000001 base units; one pascal second is 1 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μPa·s to Pa·s?
Multiply the quantity in μPa·s by 0.000001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the pascal second to micropascal second converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
