tonne per cubic meter to pound per cubic foot
Convert tonne per cubic meter (t/m³) to pound per cubic foot (lb/ft³). Use an editable density converter, conversion formula, and reference table.
1 t/m³ = 62.42796058 lb/ft³
Conversion formula
One tonne per cubic meter equals 62.42796058 pound per cubic foot. Multiply your value in tonne per cubic meter by this factor to get pound per cubic foot. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 tonne per cubic meter:5 × 62.42796058 = 312.1398029 lb/ft³
Conversion table
| tonne per cubic meter (t/m³) | pound per cubic foot (lb/ft³) |
|---|---|
| 0.01 | 0.6242796058 |
| 0.1 | 6.242796058 |
| 1 | 62.42796058 |
| 2 | 124.8559212 |
| 5 | 312.1398029 |
| 10 | 624.2796058 |
| 25 | 1,560.699014 |
| 50 | 3,121.398029 |
| 100 | 6,242.796058 |
| 1000 | 62,427.96058 |
About these measurements
Density is mass per unit volume.
The base reference used here is the kilogram per cubic meter. One tonne per cubic meter is 1,000 base units; one pound per cubic foot is 16.01846337 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert t/m³ to lb/ft³?
Multiply the quantity in t/m³ by 62.42796058. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the pound per cubic foot to tonne per cubic meter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
