kilogram per liter to tonne per cubic meter
Convert kilogram per liter (kg/L) to tonne per cubic meter (t/m³). Use an editable density converter, conversion formula, and reference table.
1 kg/L = 1 t/m³
Conversion formula
One kilogram per liter equals 1 tonne per cubic meter. Multiply your value in kilogram per liter by this factor to get tonne per cubic meter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilogram per liter:5 × 1 = 5 t/m³
Conversion table
| kilogram per liter (kg/L) | tonne per cubic meter (t/m³) |
|---|---|
| 0.01 | 0.01 |
| 0.1 | 0.1 |
| 1 | 1 |
| 2 | 2 |
| 5 | 5 |
| 10 | 10 |
| 25 | 25 |
| 50 | 50 |
| 100 | 100 |
| 1000 | 1,000 |
About these measurements
Density is mass per unit volume.
The base reference used here is the kilogram per cubic meter. One kilogram per liter is 1,000 base units; one tonne per cubic meter is 1,000 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kg/L to t/m³?
Multiply the quantity in kg/L by 1. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the tonne per cubic meter to kilogram per liter converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
