millisiemens to hectosiemens
Convert millisiemens (mS) to hectosiemens (hS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 mS = 0.00001 hS
Conversion formula
One millisiemens equals 0.00001 hectosiemens. Multiply your value in millisiemens by this factor to get hectosiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 millisiemens:5 × 0.00001 = 0.00005 hS
Conversion table
| millisiemens (mS) | hectosiemens (hS) |
|---|---|
| 0.01 | 1e-7 |
| 0.1 | 0.000001 |
| 1 | 0.00001 |
| 2 | 0.00002 |
| 5 | 0.00005 |
| 10 | 0.0001 |
| 25 | 0.00025 |
| 50 | 0.0005 |
| 100 | 0.001 |
| 1000 | 0.01 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One millisiemens is 0.001 base units; one hectosiemens is 100 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mS to hS?
Multiply the quantity in mS by 0.00001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the hectosiemens to millisiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
