microsiemens to attosiemens
Convert microsiemens (μS) to attosiemens (aS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 μS = 1,000,000,000,000 aS
Conversion formula
One microsiemens equals 1,000,000,000,000 attosiemens. Multiply your value in microsiemens by this factor to get attosiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 microsiemens:5 × 1,000,000,000,000 = 5e+12 aS
Conversion table
| microsiemens (μS) | attosiemens (aS) |
|---|---|
| 0.01 | 10,000,000,000 |
| 0.1 | 100,000,000,000 |
| 1 | 1,000,000,000,000 |
| 2 | 2e+12 |
| 5 | 5e+12 |
| 10 | 1e+13 |
| 25 | 2.5e+13 |
| 50 | 5e+13 |
| 100 | 1e+14 |
| 1000 | 1e+15 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One microsiemens is 0.000001 base units; one attosiemens is 1e-18 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μS to aS?
Multiply the quantity in μS by 1,000,000,000,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the attosiemens to microsiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
