megasiemens to gigasiemens
Convert megasiemens (MS) to gigasiemens (GS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 MS = 0.001 GS
Conversion formula
One megasiemens equals 0.001 gigasiemens. Multiply your value in megasiemens by this factor to get gigasiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 megasiemens:5 × 0.001 = 0.005 GS
Conversion table
| megasiemens (MS) | gigasiemens (GS) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One megasiemens is 1,000,000 base units; one gigasiemens is 1,000,000,000 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert MS to GS?
Multiply the quantity in MS by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the gigasiemens to megasiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
