centisiemens to decasiemens
Convert centisiemens (cS) to decasiemens (daS). Use an editable electrical conductance converter, conversion formula, and reference table.
1 cS = 0.001 daS
Conversion formula
One centisiemens equals 0.001 decasiemens. Multiply your value in centisiemens by this factor to get decasiemens. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 centisiemens:5 × 0.001 = 0.005 daS
Conversion table
| centisiemens (cS) | decasiemens (daS) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Conductance is the reciprocal of resistance.
The base reference used here is the siemens. One centisiemens is 0.01 base units; one decasiemens is 10 base units.
Important distinctions
To convert resistance into conductance, take a reciprocal. A direct unit conversion does not do that.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert cS to daS?
Multiply the quantity in cS by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decasiemens to centisiemens converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
