picocoulomb to nanocoulomb
Convert picocoulomb (pC) to nanocoulomb (nC). Use an editable electric charge converter, conversion formula, and reference table.
1 pC = 0.001 nC
Conversion formula
One picocoulomb equals 0.001 nanocoulomb. Multiply your value in picocoulomb by this factor to get nanocoulomb. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 picocoulomb:5 × 0.001 = 0.005 nC
Conversion table
| picocoulomb (pC) | nanocoulomb (nC) |
|---|---|
| 0.01 | 0.00001 |
| 0.1 | 0.0001 |
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 25 | 0.025 |
| 50 | 0.05 |
| 100 | 0.1 |
| 1000 | 1 |
About these measurements
Electric charge can be expressed in coulombs or ampere-hours.
The base reference used here is the coulomb. One picocoulomb is 1e-12 base units; one nanocoulomb is 1e-9 base units.
Important distinctions
Ampere-hours are charge, not energy. Battery voltage is needed to calculate watt-hours.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert pC to nC?
Multiply the quantity in pC by 0.001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the nanocoulomb to picocoulomb converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
