milliampere-hour to decacoulomb
Convert milliampere-hour (mAh) to decacoulomb (daC). Use an editable electric charge converter, conversion formula, and reference table.
1 mAh = 0.36 daC
Conversion formula
One milliampere-hour equals 0.36 decacoulomb. Multiply your value in milliampere-hour by this factor to get decacoulomb. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 milliampere-hour:5 × 0.36 = 1.8 daC
Conversion table
| milliampere-hour (mAh) | decacoulomb (daC) |
|---|---|
| 0.01 | 0.0036 |
| 0.1 | 0.036 |
| 1 | 0.36 |
| 2 | 0.72 |
| 5 | 1.8 |
| 10 | 3.6 |
| 25 | 9 |
| 50 | 18 |
| 100 | 36 |
| 1000 | 360 |
About these measurements
Electric charge can be expressed in coulombs or ampere-hours.
The base reference used here is the coulomb. One milliampere-hour is 3.6 base units; one decacoulomb is 10 base units.
Important distinctions
Ampere-hours are charge, not energy. Battery voltage is needed to calculate watt-hours.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert mAh to daC?
Multiply the quantity in mAh by 0.36. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decacoulomb to milliampere-hour converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
