decifarad to microfarad
Convert decifarad (dF) to microfarad (μF). Use an editable capacitance converter, conversion formula, and reference table.
1 dF = 100,000 μF
Conversion formula
One decifarad equals 100,000 microfarad. Multiply your value in decifarad by this factor to get microfarad. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decifarad:5 × 100,000 = 500,000 μF
Conversion table
| decifarad (dF) | microfarad (μF) |
|---|---|
| 0.01 | 1,000 |
| 0.1 | 10,000 |
| 1 | 100,000 |
| 2 | 200,000 |
| 5 | 500,000 |
| 10 | 1,000,000 |
| 25 | 2,500,000 |
| 50 | 5,000,000 |
| 100 | 10,000,000 |
| 1000 | 100,000,000 |
About these measurements
Capacitance relates stored charge to potential difference.
The base reference used here is the farad. One decifarad is 0.1 base units; one microfarad is 0.000001 base units.
Important distinctions
Common component values use microfarads, nanofarads, and picofarads.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert dF to μF?
Multiply the quantity in dF by 100,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the microfarad to decifarad converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
