decafarad to decifarad
Convert decafarad (daF) to decifarad (dF). Use an editable capacitance converter, conversion formula, and reference table.
1 daF = 100 dF
Conversion formula
One decafarad equals 100 decifarad. Multiply your value in decafarad by this factor to get decifarad. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decafarad:5 × 100 = 500 dF
Conversion table
| decafarad (daF) | decifarad (dF) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Capacitance relates stored charge to potential difference.
The base reference used here is the farad. One decafarad is 10 base units; one decifarad is 0.1 base units.
Important distinctions
Common component values use microfarads, nanofarads, and picofarads.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daF to dF?
Multiply the quantity in daF by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decifarad to decafarad converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
