square nanometer to are
Convert square nanometer (nm²) to are (a). Use an editable area converter, conversion formula, and reference table.
1 nm² = 1e-20 a
Conversion formula
One square nanometer equals 1e-20 are. Multiply your value in square nanometer by this factor to get are. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 square nanometer:5 × 1e-20 = 5e-20 a
Conversion table
| square nanometer (nm²) | are (a) |
|---|---|
| 0.01 | 1e-22 |
| 0.1 | 1e-21 |
| 1 | 1e-20 |
| 2 | 2e-20 |
| 5 | 5e-20 |
| 10 | 1e-19 |
| 25 | 2.5e-19 |
| 50 | 5e-19 |
| 100 | 1e-18 |
| 1000 | 1e-17 |
About these measurements
Area measures a surface in two dimensions.
The base reference used here is the square meter. One square nanometer is 1e-18 base units; one are is 100 base units.
Important distinctions
Square a length factor to convert an area. Units with equal factors can have different conventional uses.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert nm² to a?
Multiply the quantity in nm² by 1e-20. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the are to square nanometer converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
