are to square decameter
Convert are (a) to square decameter (dam²). Use an editable area converter, conversion formula, and reference table.
1 a = 1 dam²
Conversion formula
One are equals 1 square decameter. Multiply your value in are by this factor to get square decameter. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 are:5 × 1 = 5 dam²
Conversion table
| are (a) | square decameter (dam²) |
|---|---|
| 0.01 | 0.01 |
| 0.1 | 0.1 |
| 1 | 1 |
| 2 | 2 |
| 5 | 5 |
| 10 | 10 |
| 25 | 25 |
| 50 | 50 |
| 100 | 100 |
| 1000 | 1,000 |
About these measurements
Area measures a surface in two dimensions.
The base reference used here is the square meter. One are is 100 base units; one square decameter is 100 base units.
Important distinctions
Square a length factor to convert an area. Units with equal factors can have different conventional uses.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert a to dam²?
Multiply the quantity in a by 1. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the square decameter to are converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
