revolution per minute to degree per second
Convert revolution per minute (rpm) to degree per second (°/s). Use an editable angular velocity converter, conversion formula, and reference table.
1 rpm = 6 °/s
Conversion formula
One revolution per minute equals 6 degree per second. Multiply your value in revolution per minute by this factor to get degree per second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 revolution per minute:5 × 6 = 30 °/s
Conversion table
| revolution per minute (rpm) | degree per second (°/s) |
|---|---|
| 0.01 | 0.06 |
| 0.1 | 0.6 |
| 1 | 6 |
| 2 | 12 |
| 5 | 30 |
| 10 | 60 |
| 25 | 150 |
| 50 | 300 |
| 100 | 600 |
| 1000 | 6,000 |
About these measurements
Angular velocity describes rotation per unit time.
The base reference used here is the radian per second. One revolution per minute is 0.1047197551 base units; one degree per second is 0.01745329252 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert rpm to °/s?
Multiply the quantity in rpm by 6. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the degree per second to revolution per minute converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
