radian per minute to radian per second
Convert radian per minute (rad/min) to radian per second (rad/s). Use an editable angular velocity converter, conversion formula, and reference table.
1 rad/min = 0.01666666667 rad/s
Conversion formula
One radian per minute equals 0.01666666667 radian per second. Multiply your value in radian per minute by this factor to get radian per second. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 radian per minute:5 × 0.01666666667 = 0.08333333333 rad/s
Conversion table
| radian per minute (rad/min) | radian per second (rad/s) |
|---|---|
| 0.01 | 0.0001666666667 |
| 0.1 | 0.001666666667 |
| 1 | 0.01666666667 |
| 2 | 0.03333333333 |
| 5 | 0.08333333333 |
| 10 | 0.1666666667 |
| 25 | 0.4166666667 |
| 50 | 0.8333333333 |
| 100 | 1.666666667 |
| 1000 | 16.66666667 |
About these measurements
Angular velocity describes rotation per unit time.
The base reference used here is the radian per second. One radian per minute is 0.01666666667 base units; one radian per second is 1 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert rad/min to rad/s?
Multiply the quantity in rad/min by 0.01666666667. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the radian per second to radian per minute converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
