microradian to deciradian
Convert microradian (μrad) to deciradian (drad). Use an editable angle converter, conversion formula, and reference table.
1 μrad = 0.00001 drad
Conversion formula
One microradian equals 0.00001 deciradian. Multiply your value in microradian by this factor to get deciradian. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 microradian:5 × 0.00001 = 0.00005 drad
Conversion table
| microradian (μrad) | deciradian (drad) |
|---|---|
| 0.01 | 1e-7 |
| 0.1 | 0.000001 |
| 1 | 0.00001 |
| 2 | 0.00002 |
| 5 | 0.00005 |
| 10 | 0.0001 |
| 25 | 0.00025 |
| 50 | 0.0005 |
| 100 | 0.001 |
| 1000 | 0.01 |
About these measurements
An angle describes rotation between directions.
The base reference used here is the radian. One microradian is 0.000001 base units; one deciradian is 0.1 base units.
Important distinctions
A full turn is 360 degrees or 2π radians. Signed angles are permitted.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert μrad to drad?
Multiply the quantity in μrad by 0.00001. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the deciradian to microradian converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
