standard gravity to meter per second squared
Convert standard gravity (g₀) to meter per second squared (m/s²). Use an editable acceleration converter, conversion formula, and reference table.
1 g₀ = 9.80665 m/s²
Conversion formula
One standard gravity equals 9.80665 meter per second squared. Multiply your value in standard gravity by this factor to get meter per second squared. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 standard gravity:5 × 9.80665 = 49.03325 m/s²
Conversion table
| standard gravity (g₀) | meter per second squared (m/s²) |
|---|---|
| 0.01 | 0.0980665 |
| 0.1 | 0.980665 |
| 1 | 9.80665 |
| 2 | 19.6133 |
| 5 | 49.03325 |
| 10 | 98.0665 |
| 25 | 245.16625 |
| 50 | 490.3325 |
| 100 | 980.665 |
| 1000 | 9,806.65 |
About these measurements
Acceleration is the rate of velocity change.
The base reference used here is the meter per second squared. One standard gravity is 9.80665 base units; one meter per second squared is 1 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert g₀ to m/s²?
Multiply the quantity in g₀ by 9.80665. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the meter per second squared to standard gravity converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
