inch per second squared to standard gravity
Convert inch per second squared (in/s²) to standard gravity (g₀). Use an editable acceleration converter, conversion formula, and reference table.
1 in/s² = 0.002590079181 g₀
Conversion formula
One inch per second squared equals 0.002590079181 standard gravity. Multiply your value in inch per second squared by this factor to get standard gravity. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 inch per second squared:5 × 0.002590079181 = 0.0129503959 g₀
Conversion table
| inch per second squared (in/s²) | standard gravity (g₀) |
|---|---|
| 0.01 | 0.00002590079181 |
| 0.1 | 0.0002590079181 |
| 1 | 0.002590079181 |
| 2 | 0.005180158362 |
| 5 | 0.0129503959 |
| 10 | 0.02590079181 |
| 25 | 0.06475197952 |
| 50 | 0.129503959 |
| 100 | 0.2590079181 |
| 1000 | 2.590079181 |
About these measurements
Acceleration is the rate of velocity change.
The base reference used here is the meter per second squared. One inch per second squared is 0.0254 base units; one standard gravity is 9.80665 base units.
Important distinctions
Compound units must match the quantity and dimension. Temperature intervals use size factors rather than temperature offsets. Calorie and BTU entries use the explicit definitions shown.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert in/s² to g₀?
Multiply the quantity in in/s² by 0.002590079181. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the standard gravity to inch per second squared converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
