rad to microgray
Convert rad (rad) to microgray (μGy). Use an editable absorbed dose converter, conversion formula, and reference table.
1 rad = 10,000 μGy
Conversion formula
One rad equals 10,000 microgray. Multiply your value in rad by this factor to get microgray. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 rad:5 × 10,000 = 50,000 μGy
Conversion table
| rad (rad) | microgray (μGy) |
|---|---|
| 0.01 | 100 |
| 0.1 | 1,000 |
| 1 | 10,000 |
| 2 | 20,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 25 | 250,000 |
| 50 | 500,000 |
| 100 | 1,000,000 |
| 1000 | 10,000,000 |
About these measurements
Absorbed dose measures energy deposited per unit mass.
The base reference used here is the gray. One rad is 0.01 base units; one microgray is 0.000001 base units.
Important distinctions
Physical unit conversion only. Biological effect requires additional information and professional assessment.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert rad to μGy?
Multiply the quantity in rad by 10,000. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the microgray to rad converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
