kilogray to decagray
Convert kilogray (kGy) to decagray (daGy). Use an editable absorbed dose converter, conversion formula, and reference table.
1 kGy = 100 daGy
Conversion formula
One kilogray equals 100 decagray. Multiply your value in kilogray by this factor to get decagray. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 kilogray:5 × 100 = 500 daGy
Conversion table
| kilogray (kGy) | decagray (daGy) |
|---|---|
| 0.01 | 1 |
| 0.1 | 10 |
| 1 | 100 |
| 2 | 200 |
| 5 | 500 |
| 10 | 1,000 |
| 25 | 2,500 |
| 50 | 5,000 |
| 100 | 10,000 |
| 1000 | 100,000 |
About these measurements
Absorbed dose measures energy deposited per unit mass.
The base reference used here is the gray. One kilogray is 1,000 base units; one decagray is 10 base units.
Important distinctions
Physical unit conversion only. Biological effect requires additional information and professional assessment.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert kGy to daGy?
Multiply the quantity in kGy by 100. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the decagray to kilogray converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
