gigagray to milligray
Convert gigagray (GGy) to milligray (mGy). Use an editable absorbed dose converter, conversion formula, and reference table.
1 GGy = 1e+12 mGy
Conversion formula
One gigagray equals 1e+12 milligray. Multiply your value in gigagray by this factor to get milligray. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 gigagray:5 × 1e+12 = 5e+12 mGy
Conversion table
| gigagray (GGy) | milligray (mGy) |
|---|---|
| 0.01 | 10,000,000,000 |
| 0.1 | 100,000,000,000 |
| 1 | 1e+12 |
| 2 | 2e+12 |
| 5 | 5e+12 |
| 10 | 1e+13 |
| 25 | 2.5e+13 |
| 50 | 5e+13 |
| 100 | 1e+14 |
| 1000 | 1e+15 |
About these measurements
Absorbed dose measures energy deposited per unit mass.
The base reference used here is the gray. One gigagray is 1,000,000,000 base units; one milligray is 0.001 base units.
Important distinctions
Physical unit conversion only. Biological effect requires additional information and professional assessment.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert GGy to mGy?
Multiply the quantity in GGy by 1e+12. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the milligray to gigagray converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
