decagray to gray
Convert decagray (daGy) to gray (Gy). Use an editable absorbed dose converter, conversion formula, and reference table.
1 daGy = 10 Gy
Conversion formula
One decagray equals 10 gray. Multiply your value in decagray by this factor to get gray. For the reverse conversion, divide by the same factor.
Worked example
To convert 5 decagray:5 × 10 = 50 Gy
Conversion table
| decagray (daGy) | gray (Gy) |
|---|---|
| 0.01 | 0.1 |
| 0.1 | 1 |
| 1 | 10 |
| 2 | 20 |
| 5 | 50 |
| 10 | 100 |
| 25 | 250 |
| 50 | 500 |
| 100 | 1,000 |
| 1000 | 10,000 |
About these measurements
Absorbed dose measures energy deposited per unit mass.
The base reference used here is the gray. One decagray is 10 base units; one gray is 1 base units.
Important distinctions
Physical unit conversion only. Biological effect requires additional information and professional assessment.
Precision
The converter uses stored conversion factors and floating-point arithmetic. Results display up to ten significant digits, switching to scientific notation for very small or large values. Keep the precision of your original measurement when reporting results.
Common questions
How do I convert daGy to Gy?
Multiply the quantity in daGy by 10. You can also type the value into the converter above.
Can I reverse the conversion?
Yes. Use the swap button or open the gray to decagray converter.
Reference
NIST Guide to the SI — conversion factors and prefix conventions. SI prefixes scale units by powers of ten; the dimension-specific notes above describe the assumptions used on this page.
